Beginners Easy Woodworking Bird House

Beginners Easy Woodworking Bird House

This tutorial shows you how to make a bird house using basic woodworking skills

What you need

6ft 1×6” #2 Pine Board
Mitre saw
Nail gun
Wood glue
Drill
1 1/2” paddle bit
Wood Stain of choice
Foam paint brushes
White Paint
Clear spray paint
Sanding block 
Measuring tape
Pencil

Instructions

Directions- *wear safety glasses*
1. Carefully cut the following sized pieces from your wood board with a mitre saw.
2-7 1/4” (front and back)
2-4 1/4” (sides)
2-8” (roof)
1-8 1/2” (base)


2. Sand the boards with a sanding block.


3. Measure the center of the 7 1/4” block and draw a small line with a pencil.


4. Set the saw at a 45° angle and cut the top of the 7 1/4” block twice at a angle to make a point.
5. Sand the new edges.

6. Start building the bird house by laying the 8 1/2” board down.
7. Place a small amount of wood glue onto the bottom of a 7 1/4” board, place it onto the top back of the 8 1/2” board and carefully nail it together.


8. Place a small amount of glue onto the 4 1/4” sides, place one side on at a time and carefully nail the sides onto the top of the 8 1/2” board.

9. Add some glue onto the front of the side boards and carefully nail the last 7 1/4” on. This will be the front of the bird house.

10. Very carefully rip 1” off the long side of one of the 8” boards.

11. Place the 2 board together on the roof, glue and carefully nail the roof onto the house.

12. Place the drill bit onto the drill and carefully drill a hole in the front center of the bird house.


13. Stain the roof and base, wipe clean and let dry.


14. Paint the house a solid color, let dry, spray a clear coat of spray paint on the whole house in a well ventilated area and let dry.

Comments

  1. love how you show each and every step thanks for sharing:)

  2. Sandra Harvey says

    Love the birdhouse. Will try making one this spring.

Leave a Reply to Sandra Harvey Cancel reply