
Get more details about this project
What you need
White Felt
Green Felt
Red Embroidery Thread
3 inch (7.5cm) Red Ribbon
10 buttons
Printable Pattern – felt-button-christmas-tree-ornament-a4-template
Instructions
There’s something lovely about turning a handful of buttons and a few felt scraps into a Christmas decoration you’ll bring out year after year. This felt and button Christmas tree ornament has that cosy, handmade charm, with a little green tree in the centre and a border of button-topped felt circles.
I particularly like the red blanket stitching against the white felt. It adds a festive touch while making the sewing part of the decoration. You don’t need perfectly matching buttons, either—a selection from the button tin can give each ornament its own personality.
The printable template includes the centre circle, smaller button tabs, tree and trunk, so you can get straight to choosing your colours. There’s no sewing machine or stuffing required, just a little cutting and hand stitching.
Hang your finished ornament on the tree, tie it onto a wrapped present or stitch the year onto the back to create a keepsake for someone special.
1. Cut the Felt Pieces
For each ornament, cut:
- Two white felt circles measuring 7 cm across for the centre.
- Twenty white felt circles measuring 3.5 cm across for the ten outer button tabs.
- One small Christmas tree from green felt.
- One small trunk from brown felt.
If using the printable template, print at 100% / Actual Size and measure the check square before cutting.
Choose ten buttons small enough to leave a visible felt border around each one.
2. Decorate the Centre
Place the brown trunk near the bottom of one large white circle. Position the green tree above it, slightly overlapping the top of the trunk.
Check that the whole design fits comfortably inside the circle, leaving space around the edge for stitching.
Sew the trunk and tree in place with small running stitches or whip stitches. Work through the front circle only so the thread ends will be hidden when you add the backing.
Decorate the tree with small embroidery stitches or French knots. Red stitches at the branch tips and a few white stitched dots create the festive finish shown.
3. Attach the Hanging Ribbon
Cut approximately 12–15 cm of narrow red ribbon and fold it in half.
Place the cut ends against the wrong side of the decorated centre circle at the top, leaving the loop extending above the edge.
Stitch the ribbon ends securely to the felt. Keep these securing stitches within the area that will be covered by the backing.
4. Join the Centre Circles
Place the second large white circle behind the decorated front, with the wrong sides together.
Match the edges and pin or clip the layers in place. Blanket stitch around the circle using red embroidery thread, catching both layers.
Keep your stitches evenly spaced and pull gently so the felt remains flat. This ornament does not need stuffing.
Secure the thread and hide the tail between the felt layers.
5. Make the Ten Button Tabs
Sew one button onto the centre of a small white felt circle.
Place a second small circle behind it, hiding the button’s securing stitches between the layers. Blanket stitch around the edge with red embroidery thread.
Repeat until you have ten double-layered felt tabs, each with a button on the front.
6. Arrange the Button Border
Lay the finished centre flat with the tree upright.
Position the ten button tabs evenly around the outside. Let their inner edges overlap the centre circle slightly so there is enough felt to stitch through.
Arrange two tabs on either side of the ribbon at the top, then work around the remaining edge. Allow neighbouring tabs to overlap slightly where needed.
Check the complete arrangement before sewing so the border looks balanced.
7. Sew the Tabs in Place
Attach each tab to the centre with several small, secure stitches through the overlapping felt.
Keep the button fronts facing upwards and try to conceal the joining stitches among the existing blanket stitches.
Where neighbouring tabs touch, add a small joining stitch if needed to help the border hold its shape. Avoid pulling tightly, which can make the ornament curl.
8. Finish and Hang
Check that all ten buttons, the outer tabs and the ribbon loop are securely attached.
Trim any loose threads and gently flatten the ornament with your hands.
Your felt-and-button Christmas tree ornament is ready to hang on the tree or tie onto a wrapped gift. Keep loose buttons and small decorations away from young children.
More Felt Christmas Crafts
Use your remaining felt to make a Christmas bell ornament, a felt Christmas star or a little Christmas pudding.


















This is a nice article! <3
Great Idea, I will try to make some of tree for this year.
Love this idea! I can see this as a pincushion for any time of the year with any motif in the middle. I will make a few for Valentine’s Day with a heart in the middle.