Country Wooden Santa Christmas Decoration

Country Wooden Santa Christmas Decoration

Make this cute wooden Santa using a triangular piece of wood.

Get more details about this project

What you need

triangular block of wood
sandpaper
acrylic paint in black and pink
muslin material, enough to cover entire piece of wood
holiday material scrap for hat
gold accent holiday ribbon
gold button
white curly doll hair
small holly & berry leaves
blush & blush brush (make up)
white craft glue
textured snow paint
small paintbrushes

Instructions

Country Wooden Santa Christmas Decoration

Turn a triangular block of wood into a charming country-style Santa with muslin, Christmas fabric and a wonderfully curly beard. This is a lovely project for using small fabric scraps, leftover ribbon and that special button you’ve been saving.

The wooden base gives Santa his shape, while the fabric and simple facial details bring him to life. Choose a festive print with gold accents to match the original, or try homespun checks for a rustic farmhouse finish.

What You Need

  • A triangular wooden block with a flat bottom so it stands securely
  • Sandpaper
  • Muslin fabric, enough to cover the block
  • A scrap of Christmas fabric for the hat
  • Decorative gold ribbon for the hat brim
  • A gold button
  • White curly doll hair or curly craft hair
  • Small artificial holly leaves and berries
  • Black and pink acrylic paint
  • Blush and a soft makeup brush
  • White craft glue suitable for fabric and wood
  • Textured snow paint
  • Small paintbrushes
  • Scissors
  • Pencil
  • Optional: clips to hold fabric while the glue dries

The original project does not specify block dimensions. Choose a size that stands steadily, then cut your fabric and trims to fit.

Instructions

1. Prepare the Wooden Block

Check that the block sits securely on its bottom edge. Sand the front, back and edges, paying particular attention to corners and any rough areas that might snag the muslin.

Wipe away the sanding dust before adding glue. If your wood needs cutting, have an adult complete that step before starting the decorating.

2. Cover the Block with Muslin

Lay the block on your muslin and cut a piece large enough to wrap around it, allowing extra fabric for folding over the edges.

Spread a thin, even layer of craft glue over the front of the block. Smooth the muslin onto the surface, working from the centre towards the edges.

Continue wrapping the fabric around the sides and back. Trim away bulky excess at the corners, then fold and glue the remaining edges neatly into place. Keep joins at the back wherever possible.

Allow the glue to dry before decorating the front.

Tip: A thin layer of glue helps prevent it from soaking through and leaving obvious marks. Test a small offcut of muslin first.

3. Plan Santa’s Face and Hat

Stand the covered block upright and decide where the hat brim will sit. Leave a small area of muslin visible beneath it for Santa’s eyes, nose and cheeks.

Drape your Christmas fabric over the pointed upper section to check the proportions before cutting. In the original design, the fabric follows the wooden point to form a tall triangular cap.

4. Add the Fabric Hat

Cut a piece of Christmas fabric large enough to cover the upper section and wrap around to the back.

Fold the lower fabric edge under for a neat finish. Glue the fabric onto the block a little at a time, smoothing it gently as you work.

Wrap the remaining fabric around the sides and secure the joins at the back. Trim excess fabric to avoid a bulky seam.

Keep the wooden point clearly defined rather than gathering the fabric into a floppy hat.

5. Attach the Gold Hat Trim

Measure a length of decorative ribbon around the bottom of the hat.

Apply a narrow line of glue along the brim and press the ribbon into place. Start and finish at the back, overlapping the ends slightly.

Let the trim set before handling the front of the decoration.

6. Paint Santa’s Face

Use a fine paintbrush to add two small black dots for the eyes. Position them close together beneath the hat brim.

Add a small pink dot below the eyes for the nose. Keep the features delicate—the tiny face is part of this Santa’s charm.

Once the paint is dry, lightly brush blush onto either side of the face. Build the colour gradually rather than applying a heavy patch at once.

Tip: Practise your painted dots on a scrap of muslin first. A tiny amount of paint is easier to control.

7. Position the Holly Decoration

Arrange the holly leaves and berries at one lower corner of the triangle.

Check their position before gluing, leaving enough room for the beard to spread across the bottom. Secure the holly to the covered block and allow the glue to grip.

8. Build the Curly Beard

Gently separate small sections of white curly craft hair. Avoid pulling it completely straight; you want to keep those soft curls.

Starting beneath the face, apply small patches of glue and press the hair into place. Work downwards and outwards, covering the lower section of the triangle.

Layer additional curls over any visible gaps. Keep the eyes and nose clear, and tuck a little hair around the inner edge of the holly so the decoration looks nestled into the beard.

Let the glue dry thoroughly, then trim any stray strands that extend below the base or stop Santa from standing neatly.

9. Add the Finishing Details

Glue the gold button near the tip of the fabric hat.

Using a small brush, dab a little textured snow paint onto the holly leaves and berries. A few light touches give a frosted appearance without hiding the greenery.

Set Santa aside until all glue and paint have dried according to their product instructions.

10. Check and Display

Stand Santa on a level surface and check that no loose fabric or beard fibres are caught beneath the base.

Display him on a shelf, sideboard or mantelpiece, away from candles and other heat sources. His muslin covering and fabric hat look lovely alongside greenery, pinecones and other handmade Christmas decorations.

Make It Your Own

Try tartan fabric with plain ribbon for a homespun Santa, or choose a vintage Christmas print and an old decorative button for a nostalgic finish. A group of different-sized wooden Santas would also make a lovely display—give each one a slightly different hat while keeping the same simple face.

To store your finished Santa, place him in a box with tissue paper loosely around the hat and beard. Avoid squashing the curls beneath heavier decorations so he’s ready to come out again next Christmas.

Comments

  1. How adorable ! A great gift.

  2. Very cute and inexpensive. Perfect combination!! :o)

What do you think of this project? Let us know!