For Christmas and other occasions, dress your windows up by adding your own designs!
What you need
White wood glue (PVA)
Plastic cling wrap
Simply cut a piece of clear plastic to accommodate the size of your intended decoration.
Draw your own design, or trace your design on a piece of paper and tape it to a table or a flat surface.
Center the plastic over the design and fasten it down as well.
Using a PVA (poly vinyl acetate) based craft glue (available in most colors and some are developed for these sort of projects) draw the outlines in black and fill the others in with other colors.
It is advisable to let the outline dry before proceeding to fill the design in.
Once dry, to remove the design, place in the freezer for 10 seconds and carefully peel the design off.
Make sure the window is clean. These designs stick well to any glass preferably plain, but does hold well to patterned too.
This project was submitted by member: mez