Napkin Rings – Beaded

Napkin Rings – Beaded

This beaded tutorial shows you how to make an elegant beaded napkin ring that can be used for any special occasion.

What you need

Beads
Thick Wire (about 1.2mm gauge)
Headpins (x2)
Round-nose pliers
Flat-nose pliers
Tube shaped object

Instructions

Step 1:
Wrap the thick wire around the tube several times to create a spiral. Remove the wire carefully without pulling it out of shape.
Step 2:
By using the round-nose pliers, bend one end of the wire into a small loop.
Step 3:
Insert or thread the beads on to the spiral wire.
Step 4:

Once all beads are threaded, make a similar loop at the end of the wire. 

(This is a tricky step and can be skipped. If this step is skipped, then just use the flat nose pliers to pinch the end loops down so they stay somewhat hidden from view.)
Time to dangle some beads on the end loops. To do this:
a) Slide a bead onto a headpin and with a round-nose pliers firmly grasping the wire just above the bead (this is called the neck), bend the wire down to a sharp angle 
b) Slide the headpin through one of the loops of the napkin rings
c) Use the round-nose pliers to grasp firmly at wire just above the bead and hold the tail wire with a flat-nose pliers and create create a loop by wrapping it around tip of the round-nose pliers then slowly wrap the wire around the neck of the headpin several times

d) Cut the rest of the tail wire

…and that’s it 🙂 .

Hope you liked my tutorial.

-Selina

Comments

  1. Thank you for this wonderful tutorial Selina 🙂

  2. Excellent photo tutorial!!

  3. wonderful!!!!!

  4. Thank you for your kind words guys, i appreciate it 🙂

    As for the length, the length of the wire would depend on the diameter of the tube shaped object you use to shape your wire and also how many loops you’re making. In my example here, i’m making double loops, and my tube is 6inches in diameter. That means each one needs about 12 inches of wire. but my advise is to wrap the wire around the tube first before you start cutting them.
    Tnx again everyone 🙂

  5. this is a good project to do at hom ewhen your bored rote the cupboards and get the kit to do it !!!!!!!!!!!!!!!!!!
    have fun 🙂

  6. I wish it said what length wire to start with

  7. Those are so pretty, and such a simple thing to make! Thanks for a great tutorial!

What do you think of this project? Let us know!