What you need
Beadboard, cut to size (16×20)
Craft paint- Blue, White, and Red
Sander
Wood Stain
Instructions
1. Cut Beadboard to size of flag you want – mine measures 16 x 20″.
2. Use a ruler and pencil to draw the square where the blue of the flag and the star belong, This makes it easier to know where your stripes start and end too.
3. Paint this square blue first before paint your stripes so it has time to dry so you can paint your star or apply a Wooden cutout star.
4. While the blue paint is drying you can start painting your stripes- I used 2 lines for each color red and white.
5. Next, trace the star on on your blue square. I made my star from a stencil but you can print off a picture of a star from your computer and trace around that or go buy a stencil, whatever you prefer for this step. I carefully painted the stars white. I would strongly suggest using a small brush or stencil brush to paint on the white star.
6. Once the paint had all dried- sand down with sandpaper, especially the sides and edges. That way when you stain them they become darker and give a great Antique look.
Next, take wood stain and wipe it on the flag to give it an antique look to it using a big foam brush lightly dipped into a walnut wood stain then brushed on the corners and sides of the flag.
Hint: QUICKLY wipe off the stain with a close nit piece of fabric… the longer the stain is on the wood, the darker the stain stays. You just want an antique look not a burnt look.
this is so cool by mainor paz