Flying Christmas Duck Hangup

Flying Christmas Duck Hangup

This flying Christmas duck is 12 inch (30 cm) long and is made with felt.

What you need

1/2 yard (1/2 m) of felt
Ribbons
Embroidery thread
Wire
Buttons
Beads
Christmas Red Flowers

Instructions

Use the A4 sized pattern below to cut out your fabric.

Flying Duck Pattern.

Body

Sew both body pieces together, leaving an opening for you to fill. Turn right side out and lightly fill. Sew up opening.

At this stage you can either embroider a design onto the body or glue some flowers and beads for decoration.

Blanket stitch around the edge with an embroidery thread. Attach 2 buttons on the body as shown on the pattern.

The eyes can be done with either a black bead or some embroidery thread.

Wings

Sew 2 pieces of wings together by blanket stitching them together to match the body. Do not fill. Make the second wing the same way. Sew the wings to the body as shown in the pattern.

Wire Hangup

Using some wire cut a piece 10 inches (25 cm) long. To make the hangup, twist the ends around the buttons.

Legs
To make the legs cut a piece of wire 10 inch (25 cm)and push one end through the seam and back out again in the position shown on the pattern.

Glue a bead at end of the wire to form the feet.

Tie a ribbon around the neck.

And you’re done!

What do you think of this project? Let us know!